Diff b/w For Loop and ForEach Loop

	For Loop	ForEach Loop
1	For Loop Variable Always intOnly.	ForEach Loop Variable Same as Type of Values Under Array.
2	For loop Iterates a Statement or a Block of Statements Repeatedly until a Specified Expression Evaluates to False.	For-each loop is used to Iiterate through the Items in Object Collections, List Generic Collections or Array List Collections.
3	For Loops are Faster Than For Each Loop.	For Each Loop are Slower Than For Loop.
4	Need To Loop Bounds(Minimum,Maximum). Ex: int count=0; int j; for(int i=0;i<=5;i++) {    j=count+1; }	No Need To Loop Bounds Minimum or Maximum. EX: int z=0; int [] a=new int[]      {0,1,2,3,4,5};     foreach(int i in a)     {     z=z+1;     }

Csharppad

Compile, run and execute C# Sharp code online in an interactive REPL sandbox with code completion using your browser, iPad, iPhone, tablets and mobile


Csharppad.com

Debug mode and Release mode

Debug mode and Release mode are different configurations for building your .Net project. Programmers generally use the Debug mode for debugging step by step their .Net project and select the Release mode for the final build of Assembly file (.dll or .exe).

The Debug mode does not optimize the binary it produces because the relationship between source code and generated instructions is more complex. This allows breakpoints to be set accurately and allows a programmer to step through the code one line at a time. The Debug configuration of your program is compiled with full symbolic debug information which help the debugger figure out where it is in the source code.

Is Release mode is faster than Debug mode ?

The Release mode enables optimizations and generates without any debug data, so it is fully optimized. . Lots of your code could be completely removed or rewritten in Release mode. The resulting executable will most likely not match up with your written code. Because of this release mode will run faster than debug mode due to the optimizations.

What is .pdb files ?

Debug information can be generated in a .pdb (Program Database File) file depending on the compiler options that are used. A .pdb file holds debugging and project state information that allows incremental linking of a Debug configuration of your program. A Program Database File is created when you compile a VB.Net or C# program with debug mode.

In Asp.Net ?

It is important to note that Debug mode or Release mode in a web application is controlled by the web.config file, not your settings within Visual Studio.

    <compilation debug="true">

What Is MVC?

MVC is a software architecture and  design patterns - the structure of the system - that separates domain/application/business (whatever you prefer) logic from the rest of the user interface. It does this by separating the application into three parts: the model, the view, and the controller.

The model manages fundamental behaviors and data of the application. It can respond to requests for information, respond to instructions to change the state of its information, and even to notify observers in event-driven systems when information changes. This could be a database, or any number of data structures or storage systems. In short, it is the data and data-management of the application.

The view effectively provides the user interface element of the application. It'll render data from the model into a form that is suitable for the user interface.

The controller receives user input and makes calls to model objects and the view to perform appropriate actions.

Trigger

Trigger:

èAfter Triggers (For Triggers)

èInstead Of Triggers

 After Triggers

These triggers run after an insert, update or delete on a table. They are not supported for views. 
AFTER TRIGGERS can be classified further into three types as:

     AFTER INSERT Trigger.

     AFTER UPDATE Trigger.

    AFTER DELETE Trigger.

CREATE TABLE Employee_Test

(

Emp_ID INT Identity,

Emp_name Varchar(100),

Emp_Sal Decimal (10,2)

)

INSERT INTO Employee_Test VALUES ('Anees',1000);

INSERT INTO Employee_Test VALUES ('Rick',1200);

INSERT INTO Employee_Test VALUES ('John',1100);

INSERT INTO Employee_Test VALUES ('Stephen',1300);

INSERT INTO Employee_Test VALUES ('Maria',1400);

AFTER INSERT TRIGGER

CREATE TABLE Employee_Test_Audit

(

Emp_ID int,

Emp_name varchar(100),

Emp_Sal decimal (10,2),

Audit_Action varchar(100),

Audit_Timestamp datetime

)

 After Insert Trigger

This trigger is fired after an INSERT on the table.

CREATE TRIGGER trgAfterInsert ON [dbo].[Employee_Test]

FOR INSERT

AS

          declare @empid int;

          declare @empname varchar(100);

          declare @empsal decimal(10,2);

          declare @audit_action varchar(100);

          select @empid=i.Emp_ID from inserted i; 

          select @empname=i.Emp_Name from inserted i;

          select @empsal=i.Emp_Sal from inserted i;        

          set @audit_action='Inserted Record -- After Insert Trigger.';

          insert into Employee_Test_Audit

           (Emp_ID,Emp_Name,Emp_Sal,Audit_Action,Audit_Timestamp)

          values(@empid,@empname,@empsal,@audit_action,getdate());

          PRINT 'AFTER INSERT trigger fired.'

GO

To see the newly created trigger in action, lets insert a row into the main table as:

insert into Employee_Test values('Chris',1500);

Now, a record has been inserted into the Employee_Test table. The AFTER INSERT trigger attached to this table has inserted the record into the Employee_Test_Audit as:

AFTER UPDATE Trigger

This trigger is fired after an update on the table. Let’s create the trigger as:

CREATE TRIGGER trgAfterUpdate ON [dbo].[Employee_Test]

FOR UPDATE

AS

          declare @empid int;

          declare @empname varchar(100);

          declare @empsal decimal(10,2);

          declare @audit_action varchar(100);

          select @empid=i.Emp_ID from inserted i; 

          select @empname=i.Emp_Name from inserted i;

          select @empsal=i.Emp_Sal from inserted i;        

         

          if update(Emp_Name)

                   set @audit_action='Updated Record -- After Update Trigger.';

          if update(Emp_Sal)

                   set @audit_action='Updated Record -- After Update Trigger.';

          insert into Employee_Test_Audit(Emp_ID,Emp_Name,Emp_Sal,Audit_Action,Audit_Timestamp)

          values(@empid,@empname,@empsal,@audit_action,getdate());

          PRINT 'AFTER UPDATE Trigger fired.'

GO

AFTER UPDATE

update Employee_Test set Emp_Sal=1550 where Emp_ID=6

This inserts the row into the audit table as:

After Update Trigger.   

(c) AFTER DELETE Trigger

This trigger is fired after a delete on the table

CREATE TRIGGER trgAfterDelete ON [dbo].[Employee_Test]

AFTER DELETE

AS

          declare @empid int;

          declare @empname varchar(100);

          declare @empsal decimal(10,2);

          declare @audit_action varchar(100);

          select @empid=d.Emp_ID from deleted d;

          select @empname=d.Emp_Name from deleted d;         

          select @empsal=d.Emp_Sal from deleted d;       

          set @audit_action='Deleted -- After Delete Trigger.';

          insert into Employee_Test_Audit

(Emp_ID,Emp_Name,Emp_Sal,Audit_Action,Audit_Timestamp)

          values(@empid,@empname,@empsal,@audit_action,getdate());

          PRINT 'AFTER DELETE TRIGGER fired.'

GO

-- After Delete Trigger.  All the triggers can be enabled/disabled on the table using the statement

ALTER TABLE Employee_Test {ENABLE|DISBALE} TRIGGER ALL

Specific Triggers can be enabled or disabled as:

ALTER TABLE Employee_Test DISABLE TRIGGER trgAfterDelete

This disables the After Delete Trigger named trgAfterDelete on the specified table.

è Instead Of Triggers

INSTEAD OF TRIGGERS can be classified further into three types as:

=>      INSTEAD OF INSERT Trigger.

=>       INSTEAD OF UPDATE Trigger.

=>       INSTEAD OF DELETE Trigger.

Let’s create an Instead Of Delete Trigger as:

CREATE TRIGGER trgInsteadOfDelete ON [dbo].[Employee_Test]

INSTEAD OF DELETE

AS

          declare @emp_id int;

          declare @emp_name varchar(100);

          declare @emp_sal int;

         

          select @emp_id=d.Emp_ID from deleted d;

          select @emp_name=d.Emp_Name from deleted d;

          select @emp_sal=d.Emp_Sal from deleted d;

          BEGIN

                   if(@emp_sal>1200)

                   begin

                             RAISERROR('Cannot delete where salary > 1200',16,1);

                             ROLLBACK;

                   end

                   else

                   begin

                             delete from Employee_Test where Emp_ID=@emp_id;

                             COMMIT;

                             insert into Employee_Test_Audit(Emp_ID,Emp_Name,Emp_Sal,Audit_Action,Audit_Timestamp)

                             values(@emp_id,@emp_name,@emp_sal,'Deleted -- Instead Of Delete Trigger.',getdate());

                             PRINT 'Record Deleted -- Instead Of Delete Trigger.'

                   end

          END

GO

Compare two SQL Server Databases

--     Table Difference tool allows you to discover and reconcile differences between a source and destination table or a view. Tablediff Utility can report differences on schema and data. The most popular feature of tablediff is the fact that it can generate a script that you can run on the destination that will reconcile differences between the tables. TableDiff.exe takes 2 sets of input;
--     Connectivity - Provide source and destination objects and connectivity information. • Table Difference tool allows you to discover and reconcile differences between a source and destination table or a view. Tablediff Utility can report differences on schema and data. The most popular feature of tablediff is the fact that it can generate a script that you can run on the destination that will reconcile differences between the tables. dbcompare.exe takes 2 sets of input;
--     Connectivity - Provide source and destination objects and connectivity information. • Table Difference tool allows you to discover and reconcile differences between a source and destination table or a view. Tablediff Utility can report differences on schema and data. The most popular feature of tablediff is the fact that it can generate a script that you can run on the destination that will reconcile differences between the tables. dbcompare.exe takes 2 sets of input;
--Connectivity - Provide source and destination objects and connectivity information.

Db compare exe Download

LINQPad USE

LINQPad allows you to execute single LINQ commands against an existing EF model, or even to write dot net code in the editor and execute it like a little dynamic dot net environment.  The main application is free, but there is an auto-complete feature to the editor that you must pay in order to activate. Believe me it is worth it to pay for the license, you also support the author and show him the application is worthMONEY .  The license is very inexpensive and well worth the price in order to get intellisense like behavior on your LINQ queries.
The first couple versions I played with worked great with SQL Server, but could not load the VistaDB EF provider.  I was bummed, but at least I could debug my queries against SQL Server, and then run against VistaDB to make sure it worked the same way.  But I recently got an email from the author of LINQPad that it could load VistaDB, in version 2.

Linq Pad Download

Email Templates

Sample

Main program

static void Main(string[] args)

        {

            new Email().Run();

        }

Cs.file

public class Email

    {

       public void Run()

       {

           try

           {

               System.Net.Mail.MailMessage newmsg = new System.Net.Mail.MailMessage();

               newmsg.From = new MailAddress("from address full");

               newmsg.Subject = "Testing2";

               newmsg.To.Add("to address");

               //newmsg.To.Add("choulla.naresh@gmail.com");

               newmsg.Body = "Hellooooo2";

               SmtpClient smtp = new SmtpClient();

               smtp.Host = "host address";

//port number

               smtp.Port = "port number";

               smtp.Credentials = new System.Net.NetworkCredential("username",                      "password");

               //smtp.UseDefaultCredentials = false;

               smtp.EnableSsl = false;

               smtp.Send(newmsg);

           }

           catch(Exception Ex)

           {

               //smtp.Send(msg);

           }

       }

    }

Read Xml data and display Jquary

<?xml version="1.0" encoding="utf-8" ?>

        <booklist>

            <book>

                <title>Naresh</title>

                <author>Naresh1</author>

                <genre>Classic</genre>

            </book>

            <book>

                <title>abc</title>

                <author>def</author>

                <genre>Classic</genre>

            </book>

            <book>

                <title>qqq</title>

                <author>asd</author>

                <genre>www</genre>

            </book>

          

        </booklist>

        <script src="//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>

        <script>

            $(document).ready(function () {

                $("#contentArea").append("<ul></ul>");

                $.ajax({

                    type: "GET",

                    url: "data.xml",

                    dataType: "xml",

                    success: function (xml) {

                        $(xml).find('Book').each(function () {

                            var sTitle = $(this).find('Title').text();

                            var sAuthor = $(this).find('Author').text();

                            var sGenre = $(this).find('Genre').text();

                            $("<li></li>").html(sTitle + ", " + sAuthor + "," + sGenre).appendTo("#contentArea ul");

                        });

                    },

                    error: function () {

                        alert("An unexpected error has occurred during processing.");

                    }

                });

            });

        </script>

     

        <div id="contentArea">

        </div>